FP2025 – FP,QE20,FIBRE IP NETWORKING KIT,MULTI MODE

FP2025 – FP,QE20,FIBRE IP NETWORKING KIT,MULTI MODE

Description

Installation Instructions

Fire Detection, Control Panels and System Accessories

FP2025 is the same QE20 fibre networking kit but for multi-mode fibre.
Use it when your site fibre is 50/125 or 62.5/125 and your distances are shorter.

Additional information

Models

SMX+650-1L-PS5, SMX+900-1L-PS5, SMX+900-1L-PS11, SMX+650-1L-PS11GL, SMX+12U1LPS11, SMX+28U1LPS11, SMX+40U1LPS11, SMX+40U1LPS11, LCM-320, LEM-320

Technical Specifications

Product Code FP2025
Product Name QE20 Fibre IP Networking Kit (Multi Mode)
Main Use Fibre-optic IP networking interface for QE20 (data + VoIP audio)
Works With FP2005 QE20 RS485 Network Module (required)
Network Topology Fibre ring (TX/RX, two fibres)
Fibre Type 50/125µm or 62.5/125µm multi-mode fibre, SC connectors, two fibres
Optical Link Budget 12 dB (approx. 4 km)
Ethernet 10/100Base-T RJ45
Remote Audio Capacity Total of 31 remote nodes across Speech and WIP connections
Power Requirements 18–32 VDC, 520 mA typ @ 24V
Operating Conditions -5°C to +45°C, 10% to 93% RH non-condensing
What’s Included (Assembly) Fibre switch (multi-mode)
PIB (IP Bridge) for QE20 data + VoIP streaming
ATA (Analogue Telephone Adaptor) for VoIP audio
VIF (audio interface for PA + WIP to ATA)
Looms for RS485 Network Module + PSU connections
Internal Connections (to FP2005) VIF PA/WIP audio loom → J11 (on FP2005)
VIF QEComms loom → J5 QE COMMS +/− (on FP2005)
PIB header loom → J3 TTL SERIAL (on FP2005)
Power via 27A PSE using LM0665 3-way splitter loom
Fibre Field Wiring Connect ring fibres to switch ports 4 & 5 (unless configured differently)
Mounting QE20 mounting frame, occupies 3 × 60mm positions
Mount with 4 screws (as per kit instructions)
Kit Contents 1 × Fibre Network Kit module (FP2025 Multi Mode)
4 × M4 × 10 mounting screws
Installation instructions (LT0714)