Fire Detection, Control Panels and System Accessories
20-circuit input module for QE20.
Used for WIP phones, MCP inputs, FIP alarm inputs, and general-purpose inputs. Supports master WIP on circuit 20 and WIP audio chaining between modules.
| Models | SMX+650-1L-PS5, SMX+900-1L-PS5, SMX+900-1L-PS11, SMX+650-1L-PS11GL, SMX+12U1LPS11, SMX+28U1LPS11, SMX+40U1LPS11, SMX+40U1LPS11, LCM-320, LEM-320 |
|---|
| Product Code | FP2003 |
|---|---|
| Description | QE20 WIP/Input Module |
| Total Circuits | 20 input circuits |
| Supported Circuit Types | • WIP (FP0938 field WIP + optional Zone Manned) • WIP + MCP (FP0938 + co-located MCP) • Master WIP (Circuit 20 only) • WIP Special (Intercom phone) • MCP only (alarm input with O/C & S/C fault detection) • FIP alarm input (open circuit fault; short = alarm) • FIP alarm input with S/C fault (open = fault; short = fault; alarm via resistor) • General purpose input (2/3/4-band states) |
| EOL / Resistors | Standard EOL: 10k (or 10V Zener diode from QE90 for some inputs) MCP alarm: 1k2 (series as required by input type) Four-band states: <270R (Short), 680R (Alarm), 10k (Normal), >20k (Open) Zone Manned: 4k7 across circuit (WIP option) |
| WIP Circuit Specs | 2-wire to Vigilant FP0938 WIP phone, up to 1km screened cable, 10k EOL |
| Power Supply | 18–32 VDC |
| Current (typical / peak) | 50 mA @ 24V (all circuits = None) 75 mA @ 24V (all circuits normal with 10k EOL) 900 mA peak @ 27V (WIP all-call, 20 WIPs connected) |
| Operating Conditions | -5°C to +45°C, 10–93% RH non-condensing |
| QBus / Addressing | QBus 4-way power/comms, rotary address switches (00 = bootloader) |
| Power Options | Can be powered via 2-way 24V IN connector or via 4-way QBus IN LK1/LK2 set how power is taken and passed to other modules |
| WIP Audio Chain | RJ45 WIP AUDIO LEFT/RIGHT daisy chain from Controller (WIP RIGHT) through modules Module with address 1 must be last in chain (RIGHT port left open) |
| LED Indicators | FAULT (yellow), PWR/COMM (green), WIP ACT (red), FIP/MCP (red) |
| Mounting | 1 × 60mm position on QE20 mounting frame (2 × M6 screws) |
| Kit Includes | Module with 20 × 2-way connectors + 10k EOL resistors 3-way DC distribution loom (LM0656) RJ45 cable 1.2m QBus 4-way power/comms loom 1.2m 2 × M6 mounting screws Installation instructions |
