Fire-Lite by Honeywell offers a full range of fire alarm control panels, ancillaries and accessories — both addressable and conventional. Designed for small to mid-size buildings, these panels are easy to install, flexible to expand, and built for fast emergency response. The advanced built-in protocol ensures the fastest possible device response times.
Fire-Lite delivers reliable fire protection with smart design and powerful performance.
High-quality fire cables are essential for reliable system performance in critical moments.
They ensure stable signal transmission during emergencies, maintain connection meet strict Australian standards.
Our certified cables combine trusted performance with competitive pricing — where quality meets affordability. Don’t compromise safety with poor wiring.
DISCOVER OUR FIRE-RATED CABLES
| Product | Description | Type | Attachments |
|---|---|---|---|
| FL-816/650PS5 | Conventional panel, 8 zones, CAB650, NPS-5 power supply, 5.6A PSU | Conventional | FL-816 Brochure |
| FL-816/650PS11 | Conventional panel, 8 zones, CAB650, NPS-11 power supply, 11.7A PSU | Conventional | |
| FL-816/900PS11 | Conventional panel, 8 zones, CAB900, NPS-11 power supply, 11.7A PSU | Conventional | |
| FL-816/650PS11GL | Conventional panel, 8 zones, CAB650, NPS-11 power supply, 11.7A PSU, gas release interface | Conventional | |
| FL-816/900PS11GL | Conventional panel, 8 zones, CAB900, NPS-11 power supply, 11.7A PSU, gas release interface | Conventional |
| Product | Description | Type | Attachments |
|---|---|---|---|
| ZEM-8 | 8 Conventional Zone Expansion Module | Conventional | Photo |
| ACM-8RA | Output module, 8-way programmable relay | Conventional | - Photo |
| ZLKT16 | Zone label kit, 1-16 zones for customer labelling | Conventional | - |
| ACM-ZM8 | 8 Zone Mimic Annunciator, controller, zones 1-8, shows status of up to 8 zones | Conventional | | Photo |
| AEM-ZM8 | 8 Zone Mimic Annunciator, expander, zones 9-16, shows status of up to 8 zones | Conventional | |
| ARE | Interface Board Assembly to suit custom jobs | Conventional | Installation Sheet Brochure | Photo |
| ARE-T | Interface Board Assembly to suit Centaur | Conventional | |
| ARE-CR | Interface Board Assembly to suit custom jobs | Conventional | |
| ARE-R | Interface Board Assembly to suit Romteck & CentaurII | Conventional |
| Product | Description |
|---|---|
| CFP-16/CPU | CPU & Termination Board Replacement |
| CFP-16/KEY | Keypad (AUS) & display |
| NPS-11CHS | Replacement NPS-11 Power Supply To suit CFP-16 and AFP-3030 |
| NPS-5CHS | Replacement NPS-5 Power Supply To suit CFP-16 and AFP-3030 |
| Product | Description | Type | Attachments |
|---|---|---|---|
| SMX+650-1L-PS5 | Addressable panel, 1 SLC loop, CAB650 enclosure, NPS-5 power supply, 5.6A PSU | Addressable | SMX+ Brochure |
| SMX+900-1L-PS5 | Addressable fire alarm panel, 1 SLC loop, CAB650 enclosure, NPS-11 PS, 11.7A PSU | Addressable | |
| SMX+900-1L-PS11 | Addressable fire alarm panel, 1 SLC loop, CAB900 enclosure, NPS-5 PS, 5.6A PSU | Addressable | |
| SMX+650-1L-PS11GL | Addressable fire alarm panel, 1 SLC loop, CAB900 enclosure, NPS-11 PS, 11.7A PSU | Addressable | |
| SMX+12U1LPS11 | Addressable fire alarm panel, 1 SLC loop, CAB650 enclosure, NPS-11, gas release interface | Addressable | |
| SMX+28U1LPS11 | Addressable fire alarm panel, 1 SLC loop, 12U enclosure, NPS-11 PS, 11.7A PSU | Addressable | |
| SMX+40U1LPS11 | Addressable fire alarm panel, 1 SLC loop, 28U enclosure, NPS-11 PS, 11.7A PSU | Addressable | |
| SMX+40U1LPS11 | Addressable fire alarm panel, 1 SLC loop, 40U enclosure, NPS-11 PS, 11.7A PSU | Addressable | |
| LCM-320 | Loop Control Module Used as loops 1, 3, 5, 7 or 9 | Addressable | Brochure LCM-320 Photo LEM-320 Photo |
| LEM-320 | Loop Expander Module Used as loops 2, 4, 6, 8 or 10 | Addressable |
| Product | Description | Type | Attachments |
|---|---|---|---|
| NCM-W | Network Control Module, Wire, to suit Noti-Fire-Net | Addressable | NCM-W Photo NCM-F Photo |
| NCM-F | Network Control Module, Multi-mode Fibre, to suit Noti-Fire-Net | Addressable |
| Product | Description | Type | Attachments |
|---|---|---|---|
| LCD2-80-AUS | LCD Annunciator (80 Character), to suit AFP-3030/NCA-2 | Addressable | Brochure | Photo |
| SCS-8A | Smoke Control Annunciator (Control) 8 x switch groups | Addressable | Brochure | Photo |
| SCE-8A | Smoke Control Annunciator (Expander) 8 x switch groups | Addressable | |
| SCS-8L | Smoke Control Lamp Driver Kit 8 x switch groups | Addressable | |
| SCE-8L | Smoke Control Lamp Driver (Expander) Kit 8 x switch groups | Addressable | |
| ACM-24AT-AUS | Annunciator Control 24 buttons, 48 LEDs | Addressable | Brochure - Photo 24AT - Photo 48A |
| AEM-24AT-AUS | Annunciator Expander 24 buttons, 48 LEDs | Addressable | |
| ACM-48A-AUS | Annunciator Control, 48 LEDs, to suit AFP-3030/NCA-2 | Addressable | |
| AEM-48A-AUS | Annunciator Expander, 48 LEDs, to suit AFP-3030/NCA-2 | Addressable | |
| LDM-32-AUS | Lamp Driver Module (Control), 32 LEDs or LDM-R32 | Addressable | Brochure - Photo LDM-E32 - Photo LDM-R32 |
| LDM-E32-AUS | Lamp Driver Module (Expander), 32 LEDs or LDM-R32 | Addressable | |
| LDM-R32-AUS | Lamp Driver Relay Kit, 32 Relay board, requires LDM-32 | Addressable | |
| LDM-CBL48 | CABLE ASSEMBLY,48 INCHES | Addressable | - |
| SMX+NCA-2 | SMX+ Network Control Annunciator, controlling multiple fire panels from one location | Addressable | | Photo |
| Product | Description |
|---|---|
| CPU2-SMX+ | CPU Assembly to suit FireLite SMX+ |
| DISP-SMX+ | Keypad replacement to suit SMX+/NCA-2 |
| RLB-CFP-16 | 3V Lithium Battery Kit for CPU |
| USB3 | USB programming lead 3m, USB type A to type B |
| Product | Description | Type | Attachments |
|---|---|---|---|
| 2151BAUS | Conventional Photo-optical detector 7%/m obscuration, uses B401AUS Base | Conventional | Brochure | Photo |
| 5151AUS | Conventional Thermal Detector 63deg Fixed temp, uses B401AUS Base | Conventional | Brochure | Photo |
| 5151RAUS | Conventional Thermal Detector 63deg ROR, uses B401AUS Base | Conventional | |
| 5151HAUS | Conventional Thermal Detector 90deg Fixed temp, uses B401AUS Base | Conventional | |
| 5151RHAUS | Conventional Thermal Detector 90deg ROR, uses B401AUS Base | Conventional | |
| 885-WP | Conventional Sealed Thermal, 60deg ROR, inc flying leads and mounting base | Conventional | Brochure | Photo |
| D2-AUS | Conventional Duct Detector 2-wire inc Detector (requires sampling tube) | Conventional | Brochure | Photo |
| D4120 | Duct Detector 4-wire, 110vac/24vac/24vdc inc detector (requires sampling tube) | Conventional | Brochure | Photo |
| D4120W | Watertight Duct Detector 4-wire, 110vac/24vac/24vdc inc detector (requires sampling tube) | Conventional | |
| E60-AUS | E-Type Heat Detector Probe set at 60degC | Conventional | | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| 2351BAUS | Intelligent Photo-Optical Smoke Detector, System Sensor | Addressable | Brochure | Photo |
| 2351PTIRAUS | Intelligent Photo, Thermal and IR Multi-Criteria Detector, System Sensor | Addressable | Photo |
| 5351BAUS | Intelligent Fixed Temperature Thermal detector, System Sensor | Addressable | Brochure | Photo |
| 5351RBAUS | Intelligent Rate-of-Rise Thermal detector, System Sensor | Addressable | |
| 5351HAUS | Intelligent High Temperature Fixed Thermal detector, System Sensor | Addressable | |
| 7351AUS | Intelligent High Sensitity Detector, System Sensor | Addressable | | Photo |
| 2351BAUS-BL | SS CLIP PhotoSmoke Detector- Black requires B501AUS-BK base | Addressable | | Photo |
| 5351BAUS-BL | SS CLIP Thermal FixTemp Detector- Black requires B501AUS-BK base | Addressable | | Photo |
| 5351RBAUS-BL | SS CLIP Thermal RoR Detector- Black requires B501AUS-BK base | Addressable | | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| B401AUS | Conventional Detector Base to suit System Sensor 100 Series detectors | Conventional | | Photo |
| B501AUS-IV | Addressable Detector Base - Ivory to suit addressable detectors | Addressable | Brochure B501AUS Photo B501BI Photo |
| B501AUS-W | Addressable Detector Base - Pure White to suit addressable detectors | Addressable | |
| B501AUS-BK | Addressable Detector Base - Black to suit addressable detectors | Addressable | |
| B501BI-W | Isolator Base - Bright white to suit addressable detector | Addressable | |
| B501BI-IV | Isolator Base - Ivory to suit addressable detector | Addressable | |
| B501BI-BL | Isolator Base - Black to suit addressable detector | Addressable | |
| CP500 | Addressable Detector Programmer to suit weather-proof thermal detectors | Addressable | Photo |
| DNR-AUS | Duct Detector Housing requires intelligent detector | Addressable | Brochure | Photo |
| DNRW | Duct Detector Housing, watertight requires intelligent detector | Addressable | |
| DETSS | Stainless Steel Detector Guard Square Perforated style | - | Brochure | Photo |
| STI-8100 | Polycarbonate Detector Guard, flushmount | - | Brochure | Photo |
| STI-9604 | White wire detector guard, flushmount | - | Photo |
| STI-8200-SS | SD DAMAGE STOPPER STAINLESS | - | Photo |
| DETBKT-1 | Concealed Detector Bracket - 1m | - | Photo |
| DETBKT-2 | Concealed Detector Bracket - 2m | - | |
| DETBKT-3 | Concealed Detector Bracket - 3m | - | |
| DST1.5 | Duct sampling tube, 45cm to suit duct width 0.3 to 0.6m | - | Photo |
| DST3 | Duct sampling tube, 90cm to suit duct width 0.5 to 1.2m | - | |
| DST5 | Duct sampling tube, 1.5m to suit duct 1.2 to 2.4m | - | |
| DST10 | Duct sampling tube, 3m to suit duct 2.4m to 3.7m | - | |
| WB-1AP | ADAPTOR BASE WHITE | - | Photo |
| CK300-IR-IV | COLOR KIT IR IVORY(10 pcs) | - | |
| CK300-IR-BL | PTIR Color Kit (includes cover and trim ring) – Pack of 10 | - |
| Product | Description | Type | Attachments |
|---|---|---|---|
| FSL100-UV | Red UV Flame Detector ATEX zone 2/22 Non-hazardous, EN54-10 | Conventional | Photo |
| FSL100-UV-W | White UV Flame Detector ATEX zone 2/22 Non-hazardous, EN54-10 | Conventional | |
| FSL100-UVIR | Red UV/IR Flame Detector ATEX zone 2/22 Non-hazardous, EN54-10 | Conventional | |
| FSL100-UVIR-W | White UV/IR Flame Detector ATEX zone 2/22 Non-hazardous, EN54-10 | Conventional | |
| FSL100-IR3 | Red IR3 Flame Detector ATEX zone 2/22 Non-hazardous, EN54-10 | Conventional | |
| FSL100-IR3-W | White IR3 Flame Detector ATEX zone 2/22 Non-hazardous, EN54-10 | Conventional | |
| FSL100-SM21 | Swival mount bracket to suit FSL100, optional | - | Photo |
| FSL100-TL | FSL Test Lamp | - | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| OSI-R-SS | OSID-R System Sensor Conventional Beam Detector | Conventional | Brochure | Photo |
| OSI-RI-SS | INT BEAM AM, SYSTEM SENSOR CLIP | Conventional | Brochure | Photo |
| OSP-002 | OSID-R Laser Alignment Tool | - | Photo |
| OSP-003 | OSID FILTER ACRYLIC TEST PK10 | - | Photo |
| OSP-004 | OSID-R Test Filter 10 Pack | - | Photo |
| OSI-RWG | OSID-R BEAM WIRE GUARD | - | Photo |
| Product | Description | Attachments |
|---|---|---|
| BEAMSMK | Beam Detector Surface mount Kit to suit BEAM1224 & FSB-200 | | Photo |
| BEAMLRK | Beam Detector Long Range Kit (70m+) to suit BEAM1224(S) & FSB-200 | | Photo |
| 6500-MMK | ACCESS BEAM CONV/L MOUNT KIT | | Photo |
| RTS151Key | Remote Test & Reset switch | | Photo |
| WM2348E | SURF.MOUNT.BOX RTS151KEY | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| FLX-010 | FAAST Flex 1-pipe Stand-alone | Conventional | Photo |
| FLX-020 | FAAST Flex 2-pipe Stand-alone | Conventional | |
| FLX-SP-01 | FAAST FLEX Sensing Module | - | |
| FLX-SP-02 | FAAST FLEX Metal Filter (pack of 6) | - | |
| FLX-SP-03-EN | FAAST FLEX Front Cover (EN) | - | |
| FLX-SP-04 | FAAST FLEX BLOWER | - | |
| FLX-SP-05-EN | FAAST FLEX Internal Cover Set (EN) | - | |
| FLX-SP-06 | FAAST FLEX Adaptor Set | - |
| Product | Description | Attachments |
|---|---|---|
| E700-P-AUS | ASD - Aspirated Detector Pipe -4m length | Photo |
| E700-CT-AUS | Vesda-Pipework Capillary tube White | Photo |
| E700-PJ-AUS-W | ASD-Pipe Junction fitting White | Photo |
| E700-LB-AUS-W | ASD-Pipe Large Radius Bend (150mm) White | Photo |
| E700-SB-AUS-W | ASD-Pipe Small Radius Bend (90mm) White | Photo |
| E700-EC-AUS-W | ASD-Pipe End Cap White | Photo |
| E700-T-AUS-W | ASD-Pipe T-piece White | Photo |
| E700-PC-AUS-W | ASD-Pipe CLIP Pipework Pipe clip single point fix | Photo |
| E700-TA-AUS | ASD-Pipe TrunkAdapter for CapillaryTubes | Photo |
| E700-CSC-AUS | ASD-Pipe Sampl.Connect.forCapillaryTubes | Photo |
| E700-SP-AUS | E700-SP-Sampling point | Photo |
| Product | Description | Attachments |
|---|---|---|
| E700-SP-DCL-PIPE | ASD PIPE DECAL ROLL35 | Photo |
| Product | Description | Attachments |
|---|---|---|
| RI-CON | CONCEALED SPACE Remote Indicator "FIRE ALARM - IN CONCEALED SPACE" | Brochure Photo CON Photo ROOF |
| RI-ROOF | IN ROOF Remote Indicator "FIRE ALARM - IN ROOF" |
| Product | Description | Type | Attachments |
|---|---|---|---|
| IM-10 | Input Monitor Multi-Module | Addressable | Brochure | Photo |
| CZ-6 | Zone Interface Multi-Module | Addressable | Brochure | Photo |
| CR-6 | Relay Control Multi-module | Addressable | Brochure | Photo |
| SC-6 | Supervised Control Module | Addressable | Brochure | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| ISO524-1 | Low Profile SLC Short circuit isolator | Addressable | Photo |
| M500X | Module Single Short-circuit Device Isolator | Addressable | Brochure | Photo |
| M500M | Module Single Monitor SSD | Addressable | Brochure | Manual | Photo |
| M501M | Module Single Mini Monitor SSD | Addressable | Manual | Photo |
| M502M | Module Single Zone SSD | Addressable | Brochure | Manual | Photo |
| M500R | Module Single Relay SSD | Addressable | Brochure | Manual | Photo |
| M500S | Module Single Control SSD | Addressable | Brochure | Manual | Photo |
| M500DMR | Addressable Dual Input/Output Mod. | Addressable | Photo |
| AAM/LP/VL-FL | Firelite Alarm Acknowledgement Mod. Vert. inc LED | Addressable | Brochure Photo H Photo V |
| AAM/LP/HL-FL | Firelite Alarm Acknowledgement Mod. Horiz inc LED | Addressable | |
| AAM/LP/V-FL | Firelite Alarm Acknowledgement Mod. Vert.no LED | Addressable | |
| SMB500 | Surface mount Box to suit addressable modules | - | | Photo |
| M200E-DIN | DIN rail mounting bracket to suit Euro style modules | - | Photo |
| M200E-PMB | Panel mounting bracket to suit Euro style modules | - | Photo |
| Product | Description | Attachments |
|---|---|---|
| SURGE-MAINS | Surge suppression and line filter for 240V mains (10A max) | Photo |
| SURGE-RS485 | Surge suppression for RS485 communications | |
| SURGE-24V | Surge suppression for 24V circuits, 2 channel |
| Product | Description | Type | Attachments |
|---|---|---|---|
| LASS-BSO-NC | AA Detector Base Sounder, Ivory, Non Isolation | Addressable | Brochure | Photo |
| LASS-BSO-NCW | AA Detector Base Sounder, White, Non Isolation | Addressable | |
| LASS-BSS-NC | AA Detector Base Sounder-Strobe (Red), Ivory Base, Non Isolation | Addressable | Brochure | Photo |
| LASS-BSS-NCW | AA Detector Base Sounder-Strobe (Red), White Base, Non Isolation | Addressable | |
| LASS-WSO-NC | AA Wall Sounder, Ivory, Non Isolation | Addressable | Brochure | Photo |
| LASS-WSO-NCW | AA Wall Sounder, White, Non Isolation | Addressable | |
| LASS-WSS-NC | AA Wall Sounder-Strobe, Red, Non Isolation, ivory base | Addressable | Brochure | Photo |
| LASS-WSS-NCW | AA Wall Sounder-Strobe, Red, Non Isolation, white base | Addressable | |
| LASS-WST-NC | AA Wall Strobe, Red, Ivory, Non Isolation | Addressable | Brochure | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| WWL-PC-I00 | Wall Mount Strobe EN54-23 W-CAT (white flash/pure white body) | Addressable | | Photo |
| WRL-PC-I00 | Wall Mount Strobe EN54-23 W-CAT (red flash/pure white body) | Addressable | |
| WRL-RC-I00 | Wall Mount Strobe EN54-23 W-CAT RED FLASH RED BODY | Addressable | |
| WWA-PC-I00 | Wall Mount Sounder + Strobe EN54-23 W-CAT WHITE FLASH WHTE BODY | Addressable | |
| WSS-PC-I00 | AV PHASE II S/STROBE ISO | Addressable | | Photo |
| DSS-PC-I00 | AV D/BASE S/STROBE ISO EN54-23 O CAT | Addressable | Brochure | Photo |
| BRS-PC-I00 | STD DB S/STROBE EN54-23 C-CAT S/SENSOR | Addressable | | Photo |
| BRH-PC-I00 | PREM DB S/STROBE EN54-23 C-CAT S/SENSOR | Addressable | |
| BGL-PC-I00 | DB STROBE EN54-23 C-CAT | Addressable | | Photo |
| BSO-PP-N46 | Addressable Sounder Base - Pure white, System Sensor, CLIP | Addressable | | Photo |
| BST-PC-N00 | AV PHASE II BASE STROBE NONISO | Addressable | Photo |
| IBS-LIDPW | INT BASE SOUNDER LID X10 WHITE | - | Photo |
| B501AP | AV-device base, pure white for addressable range | - | Photo |
| WRR | Waterproof AV-device base, red for addressable range | - | Photo |
| WPW | Waterproof AV-device base, pure white for addressable range | - | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| CWSO-RR-S1 | Indoor AAD, red body, low profile base | Conventional | | Photo |
| CWSO-WW-S1 | Indoor AAD, white body, low profile base | Conventional | |
| CWSO-RR-W1 | Outdoor AAD, red body, IP65 deep base | Conventional | |
| CWSO-WW-W1 | Outdoor AAD, white body, IP65 deep base | Conventional | |
| CWST-RR-S5 | Indoor VAD, red body, red flash, clear lens, low profile base | Conventional | | Photo |
| CWST-RW-S5 | Indoor VAD, red body, white flash, clear lens, low profile base | Conventional | |
| CWST-WR-S5 | Indoor VAD, white body, red flash, clear lens, low profile base | Conventional | |
| CWST-WW-S5 | Indoor VAD, white body, white flash, clear lens, low profile base | Conventional | |
| CWST-RR-W5 | Outdoor VAD, red body, red flash, clear lens, IP65 deep base | Conventional | |
| CWST-RW-W5 | Outdoor VAD, red body, white flash, clear lens, IP65 deep base | Conventional | |
| CWST-WR-W5 | Outdoor VAD, white body, red flash, clear lens, IP65 deep base | Conventional | |
| CWST-WW-W5 | Outdoor VAD, white body, white flash, clear lens, IP65 deep base | Conventional | |
| CWSS-RR-S5 | Indoor AAD & VAD, red body, red flash, clear lens, low profile base | Conventional | | Photo |
| CWSS-RW-S5 | Indoor AAD & VAD, red body , white flash, clear lens, low profile base | Conventional | |
| CWSS-WR-S5 | Indoor AAD & VAD, white body, red flash, clear lens, low profile base | Conventional | |
| CWSS-WW-S5 | Indoor AAD & VAD, white body, white flash, clear lens, low profile base | Conventional | |
| CWSS-RR-W5 | Outdoor AAD & VAD, red body, red flash, clear lens, IP65 deep base | Conventional | |
| CWSS-RW-W5 | Outdoor AAD & VAD, red body , white flash, clear lens, IP65 deep base | Conventional | |
| CWSS-WW-W5 | Outdoor AAD & VAD, white body, white flash, clear lens, IP65 deep base | Conventional | |
| CSW | Conventional low profile mounting base, indoor, white, 5 pack | - | Photo |
| CWR | Conventional deep mounting base, IP65, Red, 5 pack | - | Photo |
| PS188 | 5 x CAV - DEEP BASE O-RING/td> | - | Photo |
| PS189 | 5 x CAV - DEEP BASE GASKET | - | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| STR-DUAL | Dual Strobe Red/Amber on metal box , Surface mount 100ma / 24V | Conventional | | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| SSM12-6 | 6" (150mm) Fire Alarm bell - 12VDC requires WBB for outdoor | Conventional | Photo |
| SSM12-8 | 8" (200mm) Fire Alarm bell - 12VDC requires WBB for outdoor | Conventional | |
| SSM24-6 | 6" (150mm) Fire Alarm bell - 24VDC requires WBB for outdoor | Conventional | |
| SSM24-8 | 8" (200mm) Fire Alarm bell - 24VDC requires WBB for outdoor | Conventional | |
| WBB | Back Box to suit Fire Allarm Bells -Red , weatherproof | - | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| M1A-R470SG-STCK-01 | Red surface mount MCP, House + Flame, back box included | Conventional | Brochure | Photo |
| M3A-R000SF-STCK-01 | Red resettable Surface mount MCP | Conventional | Brochure | Photo |
| M3A-W000SG-K013-20 | White Surface mount MCP "EVACUATE" | Conventional | Brochure | Photo |
| M3A-Y000SG-K013-65 | Yellow Surface mount MCP, "Manual Release Gas Extingushing System" | Conventional | Brochure | Photo |
| M3A-G000SG-STCK-12 | Green Surface mount MCP, "Door Release" | Conventional | Brochure | Photo |
| M3A-B000SG-K013-11 | Blue Surface mount MCP, no label | Conventional | Brochure | Photo |
| M4A-W000SG-K013-12 | White Double pole indoor MCP, Emergency door release | Conventional | Brochure | Photo |
| M4A-G000SF-STCK-12 | Green Surface mount MCP, "Emergency Door Release" | Conventional | Brochure | Photo |
| M4A-G000SF-K013-13 | MCP4A-GREEN-DPCO-SURFACE-FE1140-F 218 | Conventional | Brochure | Photo |
| W3A-R000SG-STCK-01 | Red outdoor IP67 Surface mount MCP, House + Flame | Conventional | Brochure | Photo |
| W3A-Y000SG-K013-65 | Yellow outdoor IP67 Surface mount MCP, "Manual Release Gas Extingushing System" | Conventional | Brochure | Photo |
| W3A-G000SG-STCK-12 | Green outdoor IP67 Surface mount MCP, "Emergency Door Release" | Conventional | Brochure | Photo |
| W3A-B000SG-K013-11 | Blue outdoor IP67 Surface mount MCP, no label | Conventional | Brochure | Photo |
| W3A-W000SF-K013-11 | White outdoor IP67 Surface mount MCP, Plain | Conventional | Brochure | Photo |
| W4A-G000SG-K013-12 | Green Double pole outdoor IP67 MCP, with glass element | Conventional | Brochure | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| M5A-RP01SF-K013-01 | Address CLIP Indoor MCP House+Flame with flexible element, requires clear flap and back box. | Addressable | Brochure M5A Photo W5A Photo |
| W5A-RP01SG-K013-01 | Red CLIP MCP surface, IP67, House+Flame requires SR, c/w flex-element, clear flap | Addressable |
| Product | Description | Attachments |
|---|---|---|
| PS200 | Manual Call Point clear flap to suit KAC call points | Photo |
| PS210 | Flexible Manual Call Point element | Photo |
| SC070 | Test keys for Manual Call Point (pk10) | Photo |
| SC083 | Breakable seal for hinged cover 10 x P056 (10 PACKS OF 5) | Photo |
| MUS155 | KG1 x 5 - EN54-11, MCP replacement Glass (pack of 5) | Photo |
| MUS041W | SR, MCP Surface mount box Red, to suit KAC MCPs | Photo |
| Product | Description | Type | Attachments |
|---|---|---|---|
| MDH400 | Magnetic Door Holder 400N (480008) 40kg, 50mA, to suit wall mount | Conventional | | Photo |
| MDH1000 | Magnetic Door Holder 1000N (48000A07900) 100kg, 100mA, to suit wall mount | Conventional | | Photo |
| MDH/F | MDH Floor mount bracket (48000A12006) to suit MDH400 and MDH1000 | - | - |
| MDH/W15 | MDH Wall mnt bracket 15cm (48000A07800) to suit MDH400 and MDH1000 | - | - |
| MDH/W30 | MDH Wall mt.bracket 30cm (48000A07900) to suit MDH400 and MDH1000 | - | - |
| MDH400/15 | Magnetic Door Holder 400N (480011) 40kg, wall or floor mount 15cm | Conventional | | Photo |
| MDH400/30 | Magnetic Door Holder 400N (480014) 40kg, wall or floor mount 30cm | Conventional | | Photo |
| SZ2575 | Magnetic Door Holder Surface mount box to suit MDHx00/15 and MDHx00/30 | - | - |
| MDHREM | Remote door release plate for magnetic door holder | - | | Photo |
| Product | Description |
|---|---|
| ASY-02-060 | NI-2012-01-PSI/ST ALONE |
| IFS-1125C | Supervision module for monitored outputs for connection to relays |
| PDM | Power Distribution Module. 8 x fused outputs, Door Holder Output |
| MW-03-048 | BP-1-Annunciator Blank Spare Plate in APO Grey (for LST-816 / BC200) |
| SC085 | 10 Pack of Base Sounder Lids, white |
| Product | Description | Attachments |
|---|---|---|
| KEYPAD/00 | Keypad Membrane | |
| BC200-CPU | BC-200 CPU & LCD display | Photo |
| PSI-AUS | Power Supply Interface (PSI) Kit to suit IFS-2600 + AFP-2800 + BC-200 | - |
| SCS-8AU | Smoke Control Station with 8 switches (3positions), 32 x LEDs, AS1668 | - |
| SCS-8LAU | Custom mimic module 24x inputs & outputs | |
| ACM-16ATAUS/00 | Annunciator Module with 16 push buttons, 16 Red/Amber LED's | - |
| ACM-32AAU | Annunciator Module with 32 Red LEDs E.g. Flow switches, monitors etc. | - |
| LDM-32/00 | LED Driver card for Graphic Mimic requires LDM-R32 for relays | - |
| LIM | Loop Interface Module to suit AFP-2800 | - |
| NIM | Network Interface Module For NIM replacement and network upgrade | - |
| FIM | Termination Board Replacement Kit to suit AFP-2800 | - |
| USB-AUS | USB to RS232 Converter to suit AFP-2800, VESDA. Win7 Compatible | - |
| Product | Description | Attachments |
|---|---|---|
| BATT7 | 7AH 12V SLA Battery, 151mm(l) x 65mm(w) x 101mm(h) | | Photo |
| BATT12 | 12AH 12V SLA Battery, 151mm(l) x 98mm(w) x 101mm(h) | |
| BATT18 | 18AH 12V SLA Battery, 181mm(l) x 77mm(w) x 167mm(h) | |
| BATT22 | 22AH 12V SLA Battery , 181mm(l) x 77mm(w) x 167mm(h) | |
| BATT26 | 26AH 12V SLA Battery , 175mm(l) x 166mm(w) x 125mm(h) | |
| BATT33 | 33AH 12V SLA Battery , 195mm(l) x 130mm(w) x 180mm(h) | |
| BATT40 | 40AH 12V SLA Battery, 197mm(l) x 166mm(w) x 170mm(h) | |
| BATT75 | 75AH 12V SLA Battery, 258mm(l) x 166mm(w) x 206mm(h) | |
| BATT85 | 85AH 12V SLA Battery, 305mm(L) x 168mm(W) x 212mm(H) | |
| BATT100 | 100AH 12V SLA Battery, 330mm(L) x 172mm(W) x 221mm(H) |
| Product | Description |
|---|---|
| PBC-70 | 2.6 Amp 24V power supply to suit NPS-x (non-battery backed) |
| RSP-150-27 | PS DC27V 150W with terminal cover |
| RSP-320-27 | PS DC27V 320W with terminal cover |
| HRP-300-24 | PSU 24V 14A power supply enclosed |
| P87-6100-052 | Spare Fuse holder w/Terminal - 250V 8Amp for PSU |
| GEN-41-005 | 100W 24V DC-DC converter |
| Product | Description | Attachments |
|---|---|---|
| CHS-2 | Mounting chassis for up to 2x XP modules (1 slot) | | Photo |
| CHS-4AUS | Mounting chassis for up to 4x XP modules (2 slots) | |
| CHS-6 | Mounting chassis for up to 6x XP modules (3 slots) | |
| CHS-1L | Mounting chassis to suit 1x LCM/DA-BOWS with Cable Tie Mounts | |
| CHS-2L | Mounting chassis to suit 2x LCM/DA-BOWS with Cable Tie Mounts | |
| 11976 | Metalwork of CHS-3L | |
| CHS-4L | Mounting chassis to suit 4 x LCM/DA-BOWS with Cable Tie Mounts | |
| ASE-CR | ASE bracket to suit Code Red, Almos (shallow), not suitable for WA | |
| ASEKCR | ASE Mounting Kit to Suit Code Red | |
| ASE-NT | ASE bracket to suit NTFAST switch plate | |
| ASE-R | ASE bracket to suit Romteck, Almos and Centaur II | |
| ASE-T | ASE bracket to suit Centaur |
| Product | Description | Attachments |
|---|---|---|
| ABF-1B | ABF-1B - Annunciator Enclosure Flush mount, black, 1xAnnunciator | | Photo |
| ABF-1DB-AUS | ABF-1DB - Annunciator Enclosure Flush mount, with door, 1xAnnunciator | |
| ABF-2DB-AUS | ABF-2DB - Annunciator Enclosure Flush mount, with door, 2 x Annunciator | |
| ABF-2B | ABF-2B - Annunciator Enclosure Flush mount, 2xAnnunciator | |
| ABF-4B | ABF-4B - Annunciator Enclosure Flush mount, 4xAnnunciator | |
| ABS-1B | ABS-1B - Annunciator Enclosure Surface mount, cannot fit LCD-80 | |
| ABS-1TB | ABS-1TB - Annunciator Enclosure Surface mount with trim, 1xAnnunciator | |
| ABS-2B | ABS-2B - Annunciator Enclosure Surface mount, 2xAnnunciator | |
| ABS-2D-AUS | ABS-2D - Annunciator Enclosure Surface mount, with door, 2xAnnunciator | |
| ABS-4D-AUS | ABS-4D - Annunciator Enclosure Surface mount, with door, 4xAnnunciator |
| Product | Description | Attachments |
|---|---|---|
| DGP1B | DGP Metal mounting box for 2 x XP modules | Photo |
| DGP2B | DGP Metal mounting box for 4 x XP modules | |
| ASY-01-036 | DIN Rail Mounting Kit | - |
| MA-01-018 | CAB650/BBC-Battery Box Charcoal | | Photo |
| STI-1130 | Indoor Protective Stopper with Horn and Clear Spacer c/w Fire Label | | Photo |
| STI-3150 | Weather Stopper polycarbonate enclosure for LCS. Use STI-1280 backplate and STI-3002 gaskets to achieve IP54 | |
| STI-1280 | Backplate for STI-3150 Stopper II & Weather Stopper | |
| STI-3002 | Weather Gasket for STI-3150 Stopper II & Weather Stopper |
| Product | Description |
|---|---|
| FL-BGD-STRB-LABEL | Fire-Lite Branded Brigade Strobe Label |
| WS-FIRE | Brigade "FIRE" label 150mm x 60mm, White on Red |
| WS-FIP | Sign - "FIRE INDICATOR PANEL" engraved, red on white |
| WS-000 | Sign - "Dial 000, LOCAL FIRE ALARM ONLY" engraved, red on white, 80 x 25mm |
| Product | Description |
|---|---|
| WSR-I | Red Indoor Warning Sign no face plate |
| WSF-I/CUST | Custom Face Plate - Indoor Customer Specified Text |
| WSF-I/FA-DNE | Indoor Warning Sign Fascia - FA-DNE "FIRE ALARM / DO NOT ENTER" |
| WSF-I/FA-EA | Indoor Warning Sign Fascia - FA-EA "FIRE ALARM / EVACUATE AREA" |
| WSF-I/FDC | Indoor Warning Sign Fascia - FDC "FIRE DOOR CLOSING" |
| WSF-I/DNE-GD | Indoor Warning Sign Fascia - DNE-GD "DO NOT ENTER / GAS DISCHARGED" |
| WSR-O | Red Outdoor Warning Sign no face plate |
| WSF-O/CUST | Custom Face Plate - Outdoor Customer Specified Text |
| WSF-O/FA-DNE | Outdoor Warning Sign Fascia - FA-DNE "FIRE ALARM / DO NOT ENTER" |
| WSF-O/FA-EA | Outdoor Warning Sign Fascia - FA-EA "FIRE ALARM / EVACUATE AREA" |
| WSF-O/DNE-GD | Outdoor Warning Sign Fascia - DNE-GD "DO NOT ENTER / GAS DISCHARGED" |
| WSA-I/SI | Amber Indoor Warning Sign - SI "EXTINGUISHING SYSTEM INOPERATIVE" |
| WSA-O/SI | Amber Outdoor Warning Sign - SI "EXTINGUISHING SYSTEM INOPERATIVE" |
| WSF-O/SI | Amber Outdoor Warning Sign Fascia -O/SI "EXTINGUISHING SYSTEM INOPERATIVE" |
| Product | Description | Attachments |
|---|---|---|
| FP1186 | FP,KIT,QE20,MODULE MTG FRAME C/W MTG | |
| FP1187 | FP,KIT,QE20,5 MODULE SUPPORT KIT,15U | |
| FP1189 | FP,KIT,QE20,9 MODULE SUPPORT KIT,27U | |
| FP2000 | FP, QE20 CONTROLLER MODULE | | Photo |
| FP2001 | FP,QE20 PSE,24V,27A,SPARE | | Photo |
| FP2002 | FP,QE20 RELAY OUTPUT MODULE | | Photo |
| FP2003 | FP,QE20 BASIC WIP MODULE | | Photo |
| FP2005 | FP, QE20 RS485 NETWORK MODULE | | Photo |
| FP2006 | FP, QE20 AMP MODULE, QUAD 25W | | Photo |
| FP2007 | FP,QE20 AMP MODULE,QUAD 60W,C/W RELAYS | |
| FP2008 | FP, QE20 AMP MODULE, DUAL 120W | |
| FP2009 | FP, QE20 AMP MODULE, 240W | |
| FP2010 | FP, QE20 USER INTERFACE MODULE | | Photo |
| FP2011 | FP, QE20 8Z/8WIP EXTENDER MODULE | Photo FP2011 Photo FP2012 Photo FP2013 |
| FP2012 | FP, QE20 16 WIP EXTENDER MODULE | |
| FP2013 | FP, QE20 16 ZONE EXTENDER MODULE | |
| FP2014 | FP, QE20 WIP TRAY | | Photo |
| FP2015 | FP, QE20 EXTENDER MODULE BLANK | | Photo |
| FP2018 | FP, QE20 AMP MODULE, QUAD 60W, BASIC | - |
| FP2019 | FP, QE20 RACK CAB COOLING MODULES | | Photo |
| FP2020 | FP,QE20 19" RACK CAB BATTERY SHELF | | Photo |
| FP2021 | FP,QE20,8 ZONE EXPANSION BRD,C/W LOOM & MTG | Photo FP2021 Photo FP2022 |
| FP2022 | FP,QE20,8 WIP EXPANSION BRD,C/W LOOM & MTG | |
| FP2023 | FP,QE20,2 x 4 WAY 100V SPLITTER MODULE | | Photo |
| FP2024 | FP,QE20,FIBRE IP NETWORKING KIT,SINGLE MODE | | Photo |
| FP2025 | FP,QE20,FIBRE IP NETWORKING KIT,MULTI MODE | |
| FP2026 | FP,QE20 SECP CONTROLLER MODULE C/W MTG | | Photo |
| FP2027 | FP,QE20 FUSED POWER DIST BRD & LOOMS,C/W MTG | | Photo |
| FP2028 | FP,QE20 COOLING FAN FILTER,5 PACK | | Photo |
| FP2029 | FP2029 QE20 GP MOUNTING BRACKET,1 MODULE WIDE | - |
| 734-008 | Loom 600mm 4100 PDI POWER/ 'COMM PDI TO PDI BAY - QE20 4-Way QBus / UBus | - |
| 733-672 | Loom 840mm 4100 POWER / COMM HARNESS - QE20 4-Way QBus / UBus | - |
| 734-075 | Loom 2400mm 4100 PDI Cabinet to PDI Cabinet Harness - QE20 4-Way QBus / UBus | - |
| LM0650 | LOOM,1993-27,QE20,BATT/PSE | - |
| LM0655 | LOOM,1993-32,QE20,DC | - |
| LM0656 | LOOM,1993-33,QE20,DC | - |
| LM0660 | LOOM,ETHERNET,RJ45,UTP | - |
| LM0669 | LOOM,ETHERNET,RJ45,UTP | - |
| Product | Description | Attachments |
|---|---|---|
| WIP | Warden Intercom Phone Handset to suit I-2000 | | Photo |
| Product | Description | Attachments |
|---|---|---|
| DA-30CAB | 30W BOWS stand alone in CAB650 with NPS-2 | DA SERIES Photo |
| DA-60CAB | 60W BOWS stand alone in CAB650 with NPS-11 | |
| DA-120CAB | 120W BOWS stand alone in CAB650 with NPS-11 | |
| DA2-30 | 30 Watt building occupant warning system c/w chassis | Brochure Photo-DA2-20 | Photo-DA2-60 Photo-DA2-120 | Photo-SAM4 Photo-DA-DISPF |
| DA2-60 | 60 Watt building occupant warning system c/w chassis | |
| DA2-120 | 120Watt building occupant warning system c/w chassis | |
| SAM-4 | Speaker amplifier monitoring and distribution module with 4 monitored speaker lines | |
| DA-DISPF | DA Preamp and PA microphone c/w with metalwork for one annunciator slot | |
| A4660 | 7" Master Paging Console Black | | Photo |
| GEN-41-018 | A4489-Relay/line out box | - |
| IFS-993F | Monitored Strobe / Sounder module 5A fused reversing output + fault output |
| Product | Description | Attachments |
|---|---|---|
| L-VCP06D-W | 4" Ceiling Speaker, 6/3/1.5/0.75/0.375W White | Brochure Photo W | Photo BK |
| L-VCP06D-BK | 4" Ceiling Speaker, 6/3/1.5/0.75/0.375W Black | |
| L-VHP15A/EN(SAI) | Outdoor horn speaker 15/10/5W AS7240.24 8ohm, Grey,ABS, c/w capacitor. AS7240.24 | Brochure |
| L-VJP15A/EN-W | 15W Unidirect.Proj.Speak.AS7240.24-White c/w capac.,plastic,15/7.5/3.75/1.9/0.95W - Pallet 520pcs. | Brochure Photo W | Photo BK |
| L-VJP15A/EN-BK | 15W Unidirect.Proj.Speak.AS7240.24-Black c/w capac.,plastic,15/7.5/3.75/1.9/0.95W | |
| L-SMB-W | Surface mount box, white , to suit L-VCP06D-W / SP-100 | - |
| L-SMB-BK | Surface mount box, black , to suit L-VCP06D-BK / SP-100-BK | - |
| Product | Description | Attachments |
|---|---|---|
| DA-DISPB | DA Display c/w PA microphone - CAB, with metalwork to suit CAB650/CAB900 | Photo |
| DA-DISPC | DA Display without microphone - U-series, with metal work to suit 18U/28U/40U | Photo |
| DA-DISPD | PA Selector Module with metalworks, 4 zone PA-mic control for DA-BOWS | - |
| FP1118 | I2000 Splitter Mod. 4x100V Spk.outputs | - |
Honeywell Connected Life Safety Services (CLSS) is an innovative, all-in-one cloud platform that enables systems integrators and facilities managers to deliver an enhanced fire safety service, while maximising the performance efficiencies offered by Honeywell’s trusted detection and alarm systems.
By harnessing the power of data it delivers the connectivity and intelligence needed for secure, compliant and more efficient fire system management.
