Fire Detection, Control Panels and System Accessories
FP2024 adds fibre-optic IP networking to a QE20 system (used with FP2005 RS485 Network Module).
It supports VoIP audio for remote PA (speech) and WIP between QE20 panels on a fibre ring.
This version is for single-mode fibre and long distance links.
| Models | SMX+650-1L-PS5, SMX+900-1L-PS5, SMX+900-1L-PS11, SMX+650-1L-PS11GL, SMX+12U1LPS11, SMX+28U1LPS11, SMX+40U1LPS11, SMX+40U1LPS11, LCM-320, LEM-320 |
|---|
| Product Code | FP2024 |
|---|---|
| Product Name | QE20 Fibre IP Networking Kit (Single Mode) |
| Main Use | Fibre-optic IP networking interface for QE20 (data + VoIP audio) |
| Works With | FP2005 QE20 RS485 Network Module (required) |
| Network Topology | Fibre ring (TX/RX, two fibres) |
| Fibre Type | 9/125µm single-mode fibre, SC connectors, two fibres |
| Optical Link Budget | 29 dB (approx. 40 km) |
| Ethernet | 10/100Base-T RJ45 |
| Remote Audio Capacity | Total of 31 remote nodes across Speech and WIP connections |
| Power Requirements | 18–32 VDC, 520 mA typ @ 24V |
| Operating Conditions | -5°C to +45°C, 10% to 93% RH non-condensing |
| What’s Included (Assembly) | Fibre switch (single-mode) PIB (IP Bridge) for QE20 data + VoIP streaming ATA (Analogue Telephone Adaptor) for VoIP audio VIF (audio interface for PA + WIP to ATA) Looms for RS485 Network Module + PSU connections |
| Internal Connections (to FP2005) | VIF PA/WIP audio loom → J11 (on FP2005) VIF QEComms loom → J5 QE COMMS +/− (on FP2005) PIB header loom → J3 TTL SERIAL (on FP2005) Power via 27A PSE using LM0665 3-way splitter loom |
| Fibre Field Wiring | Connect ring fibres to switch ports 4 & 5 (unless configured differently) |
| Mounting | QE20 mounting frame, occupies 3 × 60mm positions Mount with 4 screws (as per kit instructions) |
| Kit Contents | 1 × Fibre Network Kit module (FP2024 Single Mode) 4 × M4 × 10 mounting screws Installation instructions (LT0714) |
