FP2006 – FP, QE20 AMP MODULE, QUAD 25W

FP2006 – FP, QE20 AMP MODULE, QUAD 25W

Description

Installation Instructions

Fire Detection, Control Panels and System Accessories

Quad 25W 100V amplifier module for QE20. It provides 4 × 100V outputs (25W each) with EOL supervision, 4 × 24V GP outputs, and 4 audio inputs for music/paging.

Additional information

Models

SMX+650-1L-PS5, SMX+900-1L-PS5, SMX+900-1L-PS11, SMX+650-1L-PS11GL, SMX+12U1LPS11, SMX+28U1LPS11, SMX+40U1LPS11, SMX+40U1LPS11, LCM-320, LEM-320

Technical Specifications

Product Code FP2006
Product Name QE20 Amplifier Module, Quad 25W
100V Outputs 4 outputs, 25W per output (100V RMS at full power)
Speaker Line Supervision Resistor EOL supervised, up to 2 branches
EOL Values 1 branch: 56k EOL | 2 branches: 100k on each branch
Max Cable Capacitance 200nF max (sum of all connected branches)
Audio Inputs 4 isolated line-level inputs
Audio Input Level 315mV RMS nominal (full power), 1V RMS max
GP Outputs 4 × 24V DC switched outputs, normally energised
GP Output Rating 100mA max per output, optional supervision
Typical Use of GP Outputs Disable music attenuators/volume controllers during emergency signals
Standby / Music Amp Inputs Not stated for FP2006 (standby/music inputs mainly on FP2007/8/9)
Power Supply 18–32V DC
Current @ 26V DC Idle (outputs off): 95mA
Idle (outputs on, no audio): 480mA
Full Evac avg (fully loaded): 2.0A
1kHz sine (fully loaded): 6.2A
Mounting Width 1 × 60mm frame position
Mounting Screws 4 × M6 × 10
Internal Wiring (Power) Uses LM0656 3-way DC distribution + LM0655 extension (if needed for long run).
Internal Wiring (Comms) RJ45 QBus loom to Controller or another amplifier
Kit Contents Amplifier module, RJ45 loom 200mm, RJ45 loom 1000mm,
1 × LM0655 + 1 × LM0656, LT0701 instructions
Operating Conditions -5°C to +45°C, 10% to 93% RH (non-condensing)