FP2001 – FP,QE20 PSE,24V,27A,SPARE

FP2001 – FP,QE20 PSE,24V,27A,SPARE

Description

Installation Instructions

Fire Detection, Control Panels and System Accessories

High-power 26V DC supply for QE20 systems.
Provides up to 27A to run up to 480W amplifier load.
Used for system expansion or replacement. Supports multi-PSE battery sharing.

Additional information

Models

SMX+650-1L-PS5, SMX+900-1L-PS5, SMX+900-1L-PS11, SMX+650-1L-PS11GL, SMX+12U1LPS11, SMX+28U1LPS11, SMX+40U1LPS11, SMX+40U1LPS11, LCM-320, LEM-320

Technical Specifications

Product Code FP2001
Type QE20 27A Power Supply Equipment (PSE)
Primary Use Power for QE20 modules and amplifier loads
AC Input 230–240 VAC ±15%, 50/60 Hz (< 4.2A @ 230VAC)
Power Factor > 0.95 @ 230VAC
DC Output Voltage (Mains) 26 VDC nominal
DC Output Voltage (Battery) Battery voltage
Max Output Current (charging enabled) 20 A
Max Output Current (charging suppressed) 27 A
Overload Indication Peak current ~24A (OL display)
Amplifier Load Capacity Up to 480 W
Heat Dissipation 160 W max
Battery Type VRLA only
Charger Float Voltage 27.3 V (20°C nominal)
Max Charge Current 2.5 A max (when configured)
Temp Compensation -35 mV/°C
Battery Capacity Support Up to 150 Ah (system design dependent)
Relays / I/O PSE Fault relay: change-over, 2A @ 30VDC, normally energised
Mains Fail relay: change-over, 2A @ 30VDC, normally energised (0–5400s delay)
BT- Battery Test link (link between PSE on same battery)
Optional Accessory FP2027 Fuse Board (4 × fused 1A DC outputs)
Internal Connections QBus 4-way power/comms loom, LM0654 DC output leads, temperature sensing lead
Mounting 100mm wide module; mounts on QE20 mounting frame (2 × M6 screws)
Dimensions 100(W) × 280(H) × 150(D) mm (excludes leads / fuse board)
Operating Conditions -5°C to +45°C, 10–93% RH non-condensing