Fire Detection, Control Panels and System Accessories
Single 240W 100V amplifier module for QE20. It provides 1 × 100V output (240W) with EOL supervision, 4 × 24V GP outputs, and 1 audio input, plus standby/music amplifier support (FP2007/8/9 range). Often used as a strong standby amplifier.
| Models | SMX+650-1L-PS5, SMX+900-1L-PS5, SMX+900-1L-PS11, SMX+650-1L-PS11GL, SMX+12U1LPS11, SMX+28U1LPS11, SMX+40U1LPS11, SMX+40U1LPS11, LCM-320, LEM-320 |
|---|
| Product Code | FP2009 |
|---|---|
| Product Name | QE20 Amplifier Module, Single 240W |
| 100V Outputs | 1 output, 240W (100V RMS at full power) |
| Speaker Line Supervision | Resistor EOL supervised, up to 2 branches |
| EOL Values | 1 branch: 56k EOL | 2 branches: 100k on each branch |
| Max Cable Capacitance | 200nF max (sum of all connected branches) |
| Audio Inputs | 1 isolated line-level input |
| Audio Input Level | 315mV RMS nominal (full power), 1V RMS max |
| GP Outputs | 4 × 24V DC switched outputs, normally energised |
| GP Output Rating | 100mA max per output, optional supervision |
| Standby / Music Amp Inputs | Supported (FP2007/8/9 range) |
| Music Mode Limit | Max 60W per output via STANDBY/MUSIC input |
| Power Supply | 18–32V DC |
| Current @ 26V DC | Idle (outputs off): 110mA Idle (outputs on, no audio): 400mA Full Evac avg (fully loaded): 3.1A 1kHz sine (fully loaded): 12.7A |
| Mounting Width | 1 × 60mm frame position |
| Mounting Screws | 4 × M6 × 10 |
| Internal Wiring (Power) | Use LM0655 2-way DC extension lead from 27A PSE. Do NOT use LM0656 (not rated for FP2007/8/9 max current). |
| Internal Wiring (Comms) | RJ45 QBus loom to Controller or another amplifier |
| Kit Contents | Amplifier module, RJ45 loom 200mm, RJ45 loom 1000mm, 2 × LM0655, LT0701 instructions |
| Operating Conditions | -5°C to +45°C, 10% to 93% RH (non-condensing) |
