Table of Contents
ToggleOlder Rooftop Solar Systems Linked to Nearly Two-Thirds of Solar-Related House Fires in Victoria
Published: 29 September 2026 | Victoria, Australia
Older rooftop solar systems have been linked to a disproportionate number of solar-related house fires in Victoria, prompting a renewed safety warning from Energy Safe Victoria and Solar Victoria.
According to the agencies, rooftop solar systems aged four years or older account for approximately 20% of installations but were associated with almost two-thirds of solar-related house fires recorded by Energy Safe Victoria since July 2021.
The findings were highlighted in the Be Solar Safe campaign, launched on 29 September 2026, encouraging homeowners to arrange regular professional maintenance to reduce electrical faults and potential fire risks.
The campaign is particularly relevant as Victoria enters the warmer months, when Energy Safe Victoria reports that most solar-related house fires occur.
Official source: Solar Victoria – Be Solar Safe: Older Systems Drive Spring Maintenance Reminder
Older Solar Systems Account for a Disproportionate Share of Fires
The campaign highlights a significant difference between the proportion of older rooftop solar installations and their representation in reported fire incidents.
| Category | Reported figure |
|---|---|
| Solar systems aged four years or older | Approximately 20% of installations |
| Share of solar-related house fires associated with these systems | Almost two-thirds |
| Fire reporting period | Since July 2021 |
| Recommended servicing interval | At least once every two years |
| Recommended service provider | Licensed A Grade electrician |
These figures indicate the importance of regular inspection and maintenance as rooftop solar systems age.
However, the statistics do not mean that every system older than four years is unsafe. They also do not establish that age alone caused the reported fires.
Environmental exposure, installation condition, electrical components and maintenance history can all influence system safety.
What Causes Fire Risks in Rooftop Solar Systems?
Rooftop solar installations are exposed to changing weather conditions throughout their operating life.
Heat, rain, wind and other environmental factors can contribute to deterioration of electrical components.
Energy Safe Victoria identifies several areas that require attention during professional servicing:
- Electrical wiring: Damaged or deteriorated cables can create electrical faults.
- DC isolators: Weather exposure and moisture ingress can compromise electrical safety.
- Switches and connections: Defective or deteriorated components may increase the risk of electrical failure.
- Inverters: Fault indications and abnormal operation should be investigated.
- Mounting and cable protection: Loose fittings or damaged cable supports can affect system safety.
- Debris accumulation: Leaves and other combustible materials around equipment can create additional hazards.
Energy Safe Victoria specifically warns that deteriorated DC isolator enclosures can allow moisture to enter, potentially creating electrical faults and fire risks.
Regular professional inspections can help identify these conditions before they develop into more serious problems.
Source: Energy Safe Victoria – Keeping Your Home Solar Safe
How Often Should Rooftop Solar Systems Be Serviced?
Energy Safe Victoria recommends having residential rooftop solar systems professionally serviced at least once every two years.
The work should be carried out by a licensed A Grade electrician employed by a Registered Electrical Contractor.
The recommended inspection includes checking the condition of electrical wiring, isolators, switches, connections, inverters and associated components.
Homeowners should also confirm that the electrician is appropriately licensed and experienced in solar system maintenance.
Where electrical repairs are completed, the relevant Certificate of Electrical Safety should be provided.
Importantly, cleaning solar panels is not the same as completing an electrical safety inspection.
A cleaning service alone cannot confirm the condition of electrical connections, protective devices or other electrical components.
Warning Signs That a Solar System May Need Attention
Energy Safe Victoria advises homeowners to pay attention to changes that could indicate a problem with their solar installation.
These may include:
- Unexpected reductions in system performance
- Burning smells near electrical equipment
- Unusual noises from the system
- Fault messages or warnings displayed by the inverter
- Visible damage or deterioration of accessible equipment
Homeowners should not attempt to inspect, open or repair electrical components themselves.
Where a fault is suspected, a suitably licensed electrician should assess the system and determine the appropriate action.
What Does This Mean for Electrical Contractors and Facility Managers?
Although the Be Solar Safe campaign primarily targets Victorian households, its findings are also relevant to electrical contractors and building managers responsible for rooftop solar installations.
For electrical contractors, the campaign reinforces the importance of routine electrical inspections and clear maintenance records.
For facility managers, it provides a useful reminder to review the age, condition and servicing history of rooftop solar equipment.
Practical considerations include confirming when the installation was last inspected, identifying the responsible electrical contractor and ensuring that maintenance recommendations are documented.
Buildings with solar installations should also maintain appropriate emergency shutdown and isolation information.
These measures support safer maintenance and emergency response arrangements.
The campaign does not introduce a new nationwide fire protection standard or automatically impose additional requirements on every Australian solar installation.
Applicable legal and technical obligations must be considered separately.
Solar Panel Fire Safety and Professional Maintenance
The main message from Energy Safe Victoria and Solar Victoria is that rooftop solar systems should not be treated as maintenance-free electrical installations.
Even when a system continues generating electricity, deterioration may be developing in components that are not visible to the homeowner.
Professional servicing can help identify electrical faults, damaged equipment and unsafe conditions.
The agencies also warn homeowners to be cautious of unlicensed operators advertising solar maintenance services.
Electrical safety inspections and repairs must be performed by appropriately licensed professionals.
For Victorian homeowners, checking a contractor’s electrical licence before arranging work is an important part of the process.
Conclusion
The September 2026 Be Solar Safe campaign highlights an important fire safety concern in Victoria.
Rooftop solar systems aged four years or older represent approximately one-fifth of installations but have been associated with almost two-thirds of reported solar-related house fires since July 2021.
The findings reinforce the value of regular professional servicing, particularly as systems age and remain exposed to environmental conditions.
Energy Safe Victoria recommends servicing residential rooftop solar systems at least every two years through a licensed A Grade electrician.
For homeowners, electrical contractors and facility managers, maintaining accurate service records and responding promptly to warning signs can help reduce preventable electrical fire risks.
Official Sources
- Solar Victoria – Be Solar Safe: Older Systems Drive Spring Maintenance Reminder (29 September 2026)
https://www.solar.vic.gov.au/be-solar-safe-older-systems-drive-spring-maintenance-reminder - Energy Safe Victoria – Be Solar Safe
https://www.energysafe.vic.gov.au/solar-safety - Energy Safe Victoria – Keeping Your Home Solar Safe
https://www.energysafe.vic.gov.au/community-safety/energy-safety-guides/solar-safety/keeping-your-home-solar-safe
