Fire Detection, Control Panels and System Accessories
Relay output module for QE20 systems.
Provides 16 outputs: 8 outputs for VAD dual-polarity 24V or clean relay, plus 8 extra relay outputs with NO/NC selection. Used for new outputs or as a replacement module.
| Models | SMX+650-1L-PS5, SMX+900-1L-PS5, SMX+900-1L-PS11, SMX+650-1L-PS11GL, SMX+12U1LPS11, SMX+28U1LPS11, SMX+40U1LPS11, SMX+40U1LPS11, LCM-320, LEM-320 |
|---|
| Product Code | FP2002 |
|---|---|
| Description | QE20 Relay Output Module (ROM) |
| Total Outputs | 16 outputs (Relays 1–16) |
| Outputs 1–8 | Configurable per output: • VAD mode: dual polarity switched 24V, supervised, 2k7 EOL • Relay mode: clean contact (normally open) |
| Outputs 9–16 | Relay outputs, selectable per output: • Normally Open (NO) or Normally Closed (NC) |
| VAD Output Rating | 1 A max per output, 8 A max total (Outputs 1–8) |
| EOL Supervision | Short: < 1 kΩ Normal: 1.1 kΩ – 5.1 kΩ Open: > 5.2 kΩ (Uses 2.7 kΩ EOL in VAD mode) |
| Relay Contact Rating | 2 A @ 30 VDC resistive (voltage-free contacts) |
| Power Supply | 18–32 VDC |
| Current (typical) | 20 mA @ 24V (all outputs off) 210 mA @ 24V (all outputs on, excluding VAD load) |
| Operating Conditions | -5°C to +45°C, 10–93% RH non-condensing |
| QBus / Addressing | QBus 4-way loom, rotary address switches (00 = bootloader) |
| Mounting | 1 × 60mm position on QE20 mounting frame (2 × M6 screws) |
| Kit Includes | Module with terminal blocks + 2k7 EOL resistors 1 × QBus power/comms loom (LM0665, 1.2m) 2 × 2-way power looms (LM0655, 500mm) 2 × M6 × 10mm mounting screws Installation instructions |
