Table of Contents
ToggleAS/NZS 2293.1:2026 – Updated Standard for Emergency Lighting and Exit Sign Systems in Australia
A new edition of AS/NZS 2293.1:2026 – Emergency lighting and exit signs for buildings, Part 1: System design, installation and operation was published on 26 June 2026.
The updated Australian/New Zealand Standard provides a current technical reference for the design, installation and operation of emergency lighting and illuminated exit sign systems in buildings.
For electrical contractors, fire protection professionals, building designers and facility managers, the publication is an important development when planning new installations, building upgrades and compliance assessments.
However, the publication of a new standard does not automatically make it mandatory for every building or project. Its legal application depends on the National Construction Code (NCC), relevant state or territory requirements and applicable building approvals.
What Does AS/NZS 2293.1:2026 Cover?
AS/NZS 2293.1:2026 addresses the design, installation and operation of emergency lighting and exit sign systems.
These systems support safe evacuation by providing emergency illumination and helping occupants identify exits and evacuation routes when normal lighting is unavailable.
The standard covers three main areas:
| Area | Purpose |
|---|---|
| System Design | Establishing appropriate emergency lighting and exit signage arrangements for buildings |
| Installation | Installing emergency lighting and exit sign systems in accordance with applicable technical requirements |
| Operation | Supporting the correct operation of installed systems |
The standard is relevant to the planning and assessment of emergency lighting systems in commercial, industrial and other buildings within its scope.
Detailed design criteria and technical requirements must be confirmed against the full published standard.
Reference: AS/NZS 2293.1:2026 – Intertek Inform
What Has Changed in the 2026 Edition?
The confirmed update is the publication of AS/NZS 2293.1:2026, which supersedes the previous edition.
The new publication is relevant to organisations responsible for designing, installing and assessing emergency lighting systems.
However, the publicly available catalogue information does not provide a complete technical comparison between the previous and current editions.
Specific changes to illumination levels, emergency lighting coverage, exit sign positioning, installation arrangements or other technical criteria should not be assumed without reviewing the full standard.
Before updating specifications or installation procedures, project teams should:
- Confirm the edition required by the applicable regulatory framework.
- Review the full 2026 standard and any relevant amendments or supporting documents.
- Identify technical differences that may affect the project.
- Check whether existing designs or specifications require revision.
- Confirm any applicable transition arrangements before making compliance decisions.
This approach helps prevent incorrect assumptions about new requirements and unnecessary changes to existing installations.
Understanding the AS/NZS 2293 Standards
The AS/NZS 2293 series addresses different aspects of emergency lighting and exit signage.
Each part has a specific purpose.
| Standard | Primary purpose |
|---|---|
| AS/NZS 2293.1:2026 | System design, installation and operation |
| AS/NZS 2293.2:2019 | Routine service and maintenance |
| AS/NZS 2293.3:2026 | Product requirements for emergency luminaires and exit signs |
AS/NZS 2293.1 addresses how emergency lighting and exit sign systems are designed, installed and operated.
AS/NZS 2293.2 addresses routine service and maintenance of installed systems.
AS/NZS 2293.3 focuses on the design, construction, performance and testing of emergency luminaires and exit signs themselves.
These standards work together but are not interchangeable.
A product’s conformity with AS/NZS 2293.3 does not, by itself, establish that an entire installation satisfies the system requirements of AS/NZS 2293.1.
Similarly, routine maintenance requirements must be assessed against the applicable servicing standard and regulatory obligations.
Does AS/NZS 2293.1:2026 Apply to All Australian Buildings?
Not automatically.
Australian Standards are technical documents, and their legal application depends on how they are referenced in legislation, building regulations and other applicable instruments.
The National Construction Code establishes minimum building requirements, including provisions relating to emergency lighting and exit signage.
However, the publication of AS/NZS 2293.1:2026 does not, by itself, confirm that this edition has been adopted for every project across Australia.
The applicable requirements may depend on:
- The edition of the NCC applicable to the building or project.
- State or territory legislation and regulatory requirements.
- Existing development and building approvals.
- The type and scope of proposed building work.
- Any relevant transitional provisions.
- The standards referenced in approved project documentation.
For existing buildings, publication of a new standard should not automatically be interpreted as a requirement to redesign or replace an entire emergency lighting system.
Any upgrade or replacement obligation must be determined from the applicable regulatory framework and the specific circumstances of the building.
What Should Electrical Contractors and Fire Protection Professionals Consider?
The 2026 edition provides an opportunity to review emergency lighting design and installation practices.
1. Confirm the applicable standard edition
Before starting design or installation work, identify which edition is required under the relevant building regulations and project approvals.
2. Review system design documentation
Emergency lighting and exit signage arrangements should be assessed against the applicable design requirements.
Where the 2026 edition is required, project teams should review the full standard to identify any technical provisions affecting the proposed installation.
3. Coordinate system design and product selection
Emergency lighting equipment should be selected to suit the approved system design and installation environment.
Product conformity and system compliance are related but separate considerations.
4. Maintain accurate installation records
Project documentation should identify the applicable standard edition, approved design, installation details and relevant technical information.
Accurate records support future inspections, maintenance and building modifications.
5. Review operational and maintenance responsibilities
Emergency lighting systems must remain functional throughout their service life.
Building owners and facility managers should ensure that inspection, testing and maintenance responsibilities are clearly assigned and that the applicable servicing requirements are followed.
Why the Updated Standard Matters for the Fire Protection Industry
Emergency lighting and illuminated exit signs are important components of building evacuation safety.
Their effectiveness depends on appropriate system design, correct installation and reliable operation.
The publication of AS/NZS 2293.1:2026 is therefore relevant to several industry groups.
Electrical contractors should review the edition applicable to new installations and refurbishment projects.
Fire protection professionals should understand how emergency lighting system requirements interact with building fire safety and evacuation arrangements.
Building designers and consultants should ensure project specifications reference the appropriate standards and regulatory requirements.
Facility managers and building owners should maintain accurate documentation and confirm whether building modifications or upgrades affect existing emergency lighting arrangements.
The key consideration is to distinguish between a newly published technical standard and a legally applicable requirement.
This distinction helps organisations make informed decisions without assuming that every new edition automatically changes the obligations of existing buildings.
Frequently Asked Questions
When was AS/NZS 2293.1:2026 published?
AS/NZS 2293.1:2026 was published on 26 June 2026. It is the updated edition of the Australian/New Zealand Standard covering emergency lighting and exit sign system design, installation and operation.
Does the new standard require existing emergency lighting systems to be upgraded?
Not automatically. Publication alone does not establish a nationwide upgrade requirement. The applicable obligations depend on building regulations, approvals and the circumstances of the installation.
What is the difference between AS/NZS 2293.1:2026 and AS/NZS 2293.3:2026?
AS/NZS 2293.1:2026 addresses system design, installation and operation. AS/NZS 2293.3:2026 addresses product requirements for emergency luminaires and exit signs, including their design, construction, performance and testing.
Conclusion
The publication of AS/NZS 2293.1:2026 is an important update to Australia’s emergency lighting and exit signage standards framework.
The new edition provides a current technical reference for the design, installation and operation of emergency lighting systems.
For electrical contractors, fire protection professionals, building designers and facility managers, the priority is to understand the scope of the updated standard, confirm its regulatory application and review relevant technical documentation.
While the publication is significant for future design and installation work, it should not be interpreted as an automatic requirement to upgrade every existing emergency lighting system.
Compliance decisions should be based on the full standard, applicable legislation and the requirements of each building or project.
References
- AS/NZS 2293.1:2026 – Intertek Inform
- Standards Australia
- National Construction Code – Australian Building Codes Board
