Channel Exit Light Timer - TEST SWITCH

Channel Exit Light Timer - TEST SWITCH



Login to view price


Calculate Shipping


Compliance with Australian Standard AS2293.3

Function and Specifications

  • The ELTR consists of a microprocessor timer for 90 minutes or 120 minutes +/- 1%
  • Push button ELTR-4-P
  • Key Switch ELTR-4-K
  • An External Loop connection is available for an additional Key Switch (ELTR-4-P Only)
  • Power LED and a Timer LED
  • Relay Outputs
    • 4 isolated Normally Closed Contacts, 16A 230VAC , 3000VA, (30A Peak)
    • 1 single 8A 230V Normally Open, Switched Active contact for external monitoring or

Control of additional relays

  • The relays are energised for 90 or 120 minutes depending on the function of the switch.
    • For 90 minutes, Press the Button, or Toggle the key switch, for less than 2 seconds.
    • For 120 minutes, Press the Button, or Toggle the key switch, for more than 3 seconds
    • The Red LED will flash at 5Hz during the count.
    • After 3 Seconds, 120 minute Test is chosen and the relay will be energised.
    • The LED will stop flashing and remains on until the switch is released.
    • Press the Button or Toggle the key switch to reset the timer.
  • Test LED will flash at 1 second rate during the timing period
  • Power consumption
    • Idle,  <30mW 0.2mA, (0.25KWh per year)  Idle Resistive
    • Relays on,  2W
  • Electrical Isolation
    • 4 independent outputs, 1000VRMS to Neutral / Earth
    • Single Auxiliary Output 750VRMS to Neutral / Earth
    • External Key Switch Loop. Non-Isolated 5-20mA 5V current loop connected to Neutral
    • ESD from
      • Switched outputs, 1.8KV  5/50uS 5W source to Neutral
      • Other contacts, 6KV Contact condition B to Neutral

3 years Warranty

Made in Australia
 

(ELTR-4K)

SKU ELTR-4K
Brand FFA

Be The First To Review This Product!

Help other Fire Factory Au users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category